Lenovo ThinkSystem SR630 Maintenance Manual page 50

Table 14. Components on the rear of the server
Callout
PCIe slot 1 on riser 1 assembly
1
PCIe slot 3 on riser 2 assembly
3
Power supply 1
5
USB 3.2 Gen 1 (5Gbps) connectors (3 DCIs)
7
XClarity Controller network connector
9
Note: For more information about each component, see "Rear components overview" on page 41.
Server model with two PCIe slots
The following illustration shows the rear view of the server model with two PCIe slots. Depending on the
model, your server might look slightly different from the illustration below.
Table 15. Components on the rear of the server
Callout
PCIe slot 1 on riser 1 assembly
1
Power supply 2 (optional)
3
NMI button
5
VGA connector
7
Ethernet connectors on OCP 3.0 Ethernet adapter
9
(optional, two or four connectors may be available)
Note: For more information about each component, see "Rear components overview" on page 41.
Server model with two 2.5-inch hot-swap rear drive bays and one PCIe slot
The following illustration shows the rear view of the server model with two hot-swap drive bays and one PCIe
slot. Depending on the model, your server might look slightly different from the illustration below.
ThinkSystem SR630 V2 Maintenance Manual
40
Callout
PCIe slot 2 on riser 1 assembly
2
Power supply 2 (optional)
4
NMI button
6
VGA connector
8
Ethernet connectors on OCP 3.0 Ethernet adapter
10
(optional)
Callout
PCIe slot 2 on riser 1 assembly
2
Power supply 1
4
USB 3.2 Gen 1 (5Gbps) connectors (3 DCIs)
6
XClarity Controller network connector
8