Lenovo ThinkSystem SR630 Maintenance Manual page 180

Hide thumbs Also See for ThinkSystem SR630:
Table of Contents

Advertisement

• The M.2 adapter module is shipped with a loose screw, but the screw is not necessarily used for
the installation.
• The M.2 adapter you want to install might be different from the following illustrations, but the
installation method is the same.
Step 2.
Adjust the retainer on the M.2 adapter to accommodate the particular size of the M.2 drive you wish
to install. See "Adjust the retainer on the M.2 adapter" on page 168.
Step 3.
Locate the M.2 drive slot on the M.2 adapter.
Note: For some M.2 adapters that support two identical M.2 drives, install the M.2 drive in slot 0
first.
Figure 92. M.2 drive slot
Step 4.
Install the M.2 adapter onto the chassis.
Figure 93. M.2 adapter installation
a.
Align the notch of the M.2 adapter with the pin on the chassis, and then place down the M.2
adapter.
b.
Tighten the screw to secure the M.2 adapter.
ThinkSystem SR630 V2 Maintenance Manual
170
Slot 0
1
Slot 1
2

Advertisement

Table of Contents
loading

Table of Contents