Table of Contents
Advertisement
Promise Technology
4.
Set SAS zone configuration (an example to set SAS zone configuration 2):
5.
Power cycle VTrak J5960 or execute CLI enclosure command (enclosure -m -r 2) to restart the VTrak
J5960.
After the boot procedure is completed, check the current SAS zone configuration with the enclosure command.
If the user queries or sets SAS zoning configuration by SSH (or Telnet) via out-of-band 1G network (RJ45),
then connect and login to VTrak J5960 IOM by SSH or Telnet utility first, then follow same procedure #2 ~ #5 to
query and set SAS zone configuration with the enclosure command.
55
System Management
Advertisement
Table of Contents
