Promise Technology
The following is an example to enable DHCP:
The following is an example to configure a static IP address for the IOM management port:
1. IP: 10.92.54.99
2. Subnet: 255.255.255.0
3.
Gateway: 10.92.54.254
The following is another example (without setting Gateway IP) to set a static IP address for the IOM management
port:
•
IP: 10.92.54.99
•
Subnet: 255.255.255.0
III. The following is an example to get IOM management port network configuration via
SAS in-band by sg3 utility in a Linux Host.
a. Execute lsscsi and then find Promise enclosure from the sg device list.
lsscsi -g
Note: If the user connects an SAS cable between the VTrak J5960 dual IOMs to the Host SAS HBA, then
two enclosure devices (sg31 and sg122) will be found. The reversion "1013" is an abbreviation
from VTrak J5960 FW version 01.00.0000.13
[0:0:676:0] enclosu Promise 4U-SAS-60-D BP 1013 -
[0:0:687:0] enclosu Promise 4U-SAS-60-D BP 1013 -
44
VTrak J5960 Series
/dev/sg1
/dev/sg12