EMAK K 700 H Workshop Manual page 38

b Disassembly / Reassembly
Warning
Wear gloves and eye protectors.
Do not let the spring out when disassembly.
Insert the hook on the outer side of the scroll spring into the hole
of the starter.
Pass the rope through the hole of the starter wheel and tie the
end of rope (shown on drawing), wind the rope onto the reel in
the arrowed direction, and remain about 30 cm outside the starter
wheel.
Note
Make sure remaining about 30 cm rope outside the starter
wheel
Assemble the starter wheel on the starter reel, insert the hook on
the inner side of scroll spring on the convex position of starter
dray.
Grasp the starter grip and pre-turn starter wheel two turns as
shown as arrow direction.
Rope
Starter reel
Starter
case
38
Workshop manual
Groove
Starter reel
Case
tab
Hamulus
Recoil starter
spring
Tie
Spring hook