Engine Oil - EMAK K 700 H Workshop Manual

Workshop manual

3.2 Engine oil

Note
Drain the oil while the engine is stopped yet warm to
ensure rapid and complete draining .

Oil is the major factor affecting performance and service
life. Don't use oil containing additives and 2-stroke engine
oil, because they lack sufficient lubricating ability and will
shorten the gasoline engine's service life.

Check the oil level with the engine stopped and on a flat
level surface.

Oil capacity: 0.60 L
In order to obtain the best performance of the engine, it is
recommended to use special engine oil certified to be OK for
Emak engines. SAE 10W-30 is the recommended oil. Other
viscosities shown in the chart may be used when the average
temperature in your area is within the recommended range.
Oil level check:
1) Remove the oil cap/dipstick and wipe it clean.
2) Insert the oil dipstick into oil filler neck but do not screw it
in, and check oil level.
3) Oil level is too low if there is no oil on the dipstick. Add
recommended oil to bring the oil level to the upper limit of
the dipstick.
4) Reinstall the cap/ dipstick securely.
Warning

Used engine oil contains carcinogenic substances. If repeatedly left in contact with the skin
for prolonged periods, it may cause skin cancer. Wash your hands thoroughly with soap
and water as soon as possible after contact with used engine oil.

Please dispose of used motor oil and the oil containers in a manner that is friendly to the
environment. We suggest you put it in a sealed container and take it to your local recycling
center or service station for reclamation. Do not throw it in the trash, or pour it on the
ground.
17
Oil dipstick
Oil drain bolt
Ambient temperature
Upper limit
Lower limit