Enabling/Disabling Devices - EMS FirePoint System 5000 User Manual

EMS SYSTEM 5000
9.2 Setting the Time and Date: -
To change the time and date, turn the control key switch into the "ON" position. Now
press the "0" Key. Press the "∇" button once until "> Time and Date <". Is displayed.
Press the "YES" key and you will enter the "| ** Date/Time **|" Menu.
To set the time, press the "YES" key again, and enter the time in 24hr, hh:mm format.
Then press the "YES" key to confirm. Press the "NO" key twice to return to the main
display.
To enter the date, (from the Date/Time Menu), press the "∇" button twice until
highlighting ">Set the Date <" then press the "YES" key. Now enter the date in
dd:mm:yy format and then press the "YES" key to confirm. Once confirmed, press the
"NO" key twice to return to the main display.
NOTE: On Multi-panel systems, it is only necessary to alter the time and date on the
Master Panel and this will automatically pass the information to other panel's on the
system.

9.3 Enabling/Disabling Devices:

To Enable/Disable a device from the main screen:
With the control key switch in the "ON" Position, press the "0" key, then scroll down to
last option, "Fire System Options".
Press the "YES" key. Now, whilst highlighting the ">Dev. Disable/Test<" option, press
the "YES" key again.
Now press the "0" key and enter the desired device number and press the "YES" key.
The display will show: -
| ** Device Status *
> Number is :
| Status is : Active |
Yes = Select
Please Enter New
Time > 12:00
Hours : Minutes
Yes = Finish
Please Enter Today's
Date > 24 / 02 / 04
Day / Month / Year
Yes = Finish
|
006 <
12:00
12:00
| Number
> Status
| Det .
Yes = Select
USER MANUAL, ISSUE 2.4 – 19/11/09
is : 006 |
is :Disable <
zone : 02 |
12:00
17