Introduction; System Design; Equipment Required; Fire Alarm Procedures - EMS FIRE SYSTEM 5000 User Manual

E.M.S Group

1.0 Introduction.

This manual contains all the information needed to operate the EMS System 5000. The instructions given in this manual must
be followed when using the system. Should you have any questions regarding the operation of this system, refer these to your
installer.

2.0 System Design.

It is assumed that the Control Panel and Devices have been installed in the correct location, in accordance with the radio survey
and system design.

3.0 Equipment Required.

No specialist equipment is required when using System 5000.

4.0 Fire Alarm Procedures.

In accordance with BS5839 Part 1:1988, written procedures must be established for dealing alarms for Fire, Fault Warnings
and the isolation of any part of the system.
A responsible person should be appointed who ensures that all users are instructed in the proper use of the system and are
familiar with all associated procedures. The nominated person shall also be responsible for leasing with the maintenance
company, on all matters relating to the maintenance of the system.
Installation Record
Installer.................................................................................
Service Telephone No...........................................................
Date......................................................................................
2
System 5000