Table of Contents
Advertisement
Loading Material
•
Stratasys H trolley (part number X3D-01006-V): This is a trolley with an electric motor for
lifting the powder container. The trolley includes the powder container tilt assembly, which
is a metal bracket mounted on the trolley with quick release bracket. The bracket can be
rotated 180 degrees in order to facilitate powder flow from the container to the printer.
•
Powder container: The blue powder container is filled with the correct ratio of used/virgin
powder.
•
Powder load adapter: This is a two-way adapter; one side mounts to the blue powder
container and the other side mounts to the printer powder container. The interface is closed
and does not allow the powder to be airborne during transfer.
Up/down
switch
Stratasys H
trolley
Tilt lock
To load the printer with powder:
Figure 16: H Trolley with powder container
© Copyright 2022 Stratasys. All rights reserved.
Refilling Powder
Powder load
adapter
Powder
container
Tilt assembly
Tilt assembly
handle
Page 115
Advertisement
Table of Contents
