Table of Contents
Advertisement
Loading Material
If the HAF level is too low and the waste level is too high, the software displays a yellow icon
with an exclamation mark. In the example shown, the HAF level is below 20% and waste level
is above 80%.
Figure 9: HAF and waste level warnings
Attempting to start a print job while the HAF level is too low will result in a warning.
Attempting to start a print job while the waste level is too high will result in a warning.
© Copyright 2022 Stratasys. All rights reserved.
Load Material Cartridges
Page 108
Advertisement
Table of Contents
