As-Needed Maintenance
3. Once all soft particles have been removed, clean the thermal camera window with lint free
pre-moistened towelettes. Use a gentle circular motion and apply very little pressure. See
Figure
4. Before the liquid from the towelettes evaporates, use a swab to wipe the thermal window
dry using a gentle circular motion and applying very little pressure. See
Cleaning the Vortex bell and the thermal camera window (lens)
88.
Figure 88: Clean the thermal window
Figure 89: Swab the thermal window
© Copyright 2022 Stratasys. All rights reserved.
Figure
89.
Page 235