Table of Contents
Advertisement
Loading Material
The software monitors the levels of the HAF cartridge and the waste cartridge. The levels of
the two cartridges are indicated at the bottom left corner of the main screen in the GUI. Each
line corresponds to a 20% range. In the example seen below, HAF and waste levels are in the
range of 40%-60%.
HAF level Waste
level
© Copyright 2022 Stratasys. All rights reserved.
Figure 7: Material levels (screen 1)
Figure 8: Material levels (screen 2)
Load Material Cartridges
Page 107
Advertisement
Table of Contents
