Heartland Ovation 2800 Owner's Manual page 46

STEP 8. Attach the two (2) leg end cap mounting brackets to the
bottom outside section of each leg using the 1/4"-20x7/8" bolts
provided. (Fig 6)
STEP 9. Position the end caps on either side of the bench. Attach using
the small 1/4 turn fasteners provided. (Fig. 6)
STEP 10. Align the slots located on the bottom of the facade with the
tabs on the front side of the leg end cap brackets. Position
facade in place. Using the 5/16" Allen wrench (provided), turn
the security fasteners on the front bench rail to lock the facade
in place (Fig.7).
NOTE: ELECTRICAL CONNECTION TO POWER SUPPLY MUST BE IN COMPLIANCE
WITH NECA REGULATIONS AND PERFORMED BY A QUALIFIED ELECTRICIAN.
IF YOU HAVE ANY QUESTIONS PLEASE CALL
www.heartlandtan.com
Fig. 6
Fig. 7
1-800-554-8268
46 10/27