STEP 6.
Mount the shocks to the unit. The shock mounting holes are located
towards the rear of the unit on both sides of the bench and
canopy. (Fig. D)
NOTE: ATTACH CYLINDER OF THE SHOCK TO THE CENTER MOUNTING HOLES IN
CANOPY AND THE SHAFT TO THE CENTER MOUNTING HOLES IN THE BENCH.
Complete the hinge installation as shown below using 3/8"x5/8"
STEP 7.
Shoulder Bolts, 3/8" nuts, 9/16" socket and 1/4" Allen wrench. (Fig. E)
www.heartlandtan.com
Fig. D
Fig. E
40
10/27