STEP 3.
Turn the unit right side up and install the hinge plate.(Fig. B)
STEP 4.
Place the bench in its final location inside of the salon.
STEP 5.
Place the canopy on top of the bench aligning the bench
and canopy hinge plates. Bolt the hinge plates together using
the 1/2"x3/8" shoulder bolts, 3/8" nuts, 9/16" socket and 1/4"
Allen wrench. (Fig. C)
NOTE: WHEN LOOKING AT THE BED FROM THE FRONT, THE CANOPY
HINGE PLATES SHOULD BE TO THE RIGHT OF THE BENCH HINGE PLATES.
www.heartlandtan.com
Fig. B
Fig. C
39
10/27