Taylor-Dunn B0-011-00 Operation, T Roubleshooting And Replacement Parts Manual page 46

MB-100-00
10. Reinstall the steering gear by performing this procedure in reverse order.
Always use new locknuts. Locknuts become less effective if used more
than once. Failure to replace the locknuts may result in the locknuts
or bolts coming loose causing property damage and/or severe bodily
11. Using the appropriate procedure, center the steering gear.
12. Check the front wheels to be sure that they are straight and realign as necessary.
13. Lower the vehicle.
14. Reconnect the main positive and negative at the batteries.
15. Remove the blocks from behind the wheels.
16. Release the park brake and test drive the vehicle.
Steering Column
Steering Wheel Cover
Jam Nut
Jam Nut
Lock Washer
Pitman Arm
Ball Joint Clamp
Ball Joint
Section 3
Steering Wheel
Dust Washer
Bearing
Steering Shaft
Shaft Collar
Pinch Bolt
Steering Gear
Bolt
Page 24
Lock Washer
Drag Link