command:
:OUTPut[n][:CHANnel[n]][:STATe]
syntax:
:OUTPut[n]:STATe<wsp>OFF|ON|0|1
description:
Switches the laser current off and on.
The laser emits light only when the current is on. Set the state to OFF or 0
to switch the laser current off. Set the state to ON or 1 to switch the laser
current on. The default is for the laser current to be off.
parameters:
0 or OFF:
1 or ON:
response:
none
example:
outp 1
affects:
All instruments
command:
:OUTPut[n][:CHANnel[n]][:STATe]?
syntax:
:OUTPut[n][:STATe]?
description:
Returns the current state of the laser current.
parameters:
none
response:
A boolean value:
example:
outp?
affects:
All instruments
Introduction to Programming
Signal Generation – The SOURce Subsystem
switch laser current off
switch laser current on
→
1<END>
95
0 – laser current off
1 – laser current on