HP 8163A Programming Manual page 92

command: :SENSE[n]:[CHANnel[n]]:POWer:WAVelength
syntax: :SENSE[n]:[CHANnel[n]]:POWer:WAVelength<wsp>
<value>|MIN|MAX|DEF [PM|NM|UM|MM|M]
description: Sets the sensor wavelength.
parameters: The wavelength as a float value in meters.
Also allowed are:
response: none
example:
sens1:pow:wav 1550nm
affects: All power meter modules
command: :SENSE[n]:[CHANnel[n]]:POWer:WAVelength?
syntax: :SENSE[n]:[CHANnel[n]]:POWer:WAVelength?
[<wsp>MIN|MAX|DEF]
description: Inquires the current sensor wavelength.
parameters: none
Also allowed are:
response: The wavelength as a float value in meters.
sens1:pow:wav? → +1.55000000E-006<END>
example
affects: All power meter modules
Introduction to Programming
Measurement Functions – The SENSe Subsystem
MIN: minimum programmable value
MAX: maximum programmable value
DEF: This is not the preset (*RST) default
MIN: minimum programmable value
MAX: maximum programmable value
DEF: This is not the preset (*RST) default
92
value but is half the sum of, the mini-
mum programmable value and the maxi-
mum programmable value
value but is half the sum of, the mini-
mum programmable value and the maxi-
mum programmable value