HP 8163A Programming Manual page 88

command: :SENSe[n]:[CHANnel[n]]:POWer:REFerence
syntax: :SENSe[n]:[CHANnel[n]]:POWer:REFerence<wsp>
TOMODule|TOREF,<value>PW|NW|UW|MW|Watt|DBM|DB
description: Sets the sensor reference value.
parameters: TOMODule:
TOREF:
The reference as a float value.
NOTE
response: none
example:
sens1:pow:ref toref,-40DBM
affects: All power meter modules
command: :SENSe[n]:[CHANnel[n]]:POWer:REFerence?
syntax: :SENSe[n]:[CHANnel[n]]:POWer:REFerence?<wsp>
TOMODule|TOREF
description: Returns the sensor reference value.
parameters: TOMODule:
TOREF:
response: The reference as a float value.
example:
sens1:pow:ref? toref
affects: All power meter modules
Introduction to Programming
Measurement Functions – The SENSe Subsystem
Sets a reference relative to another channel
Sets a constant reference value in Watts or dBm
You must append a unit type
• Watts or dBm if you use TOMODule or
• dBm if you use TOREF.
Returns the reference relative to another channel
Returns the constant reference value
88
→
-40DBM<END>