command:
[:SOURce[n]][:CHANnel[n]]:POWer[:LEVel]:RISetime
syntax:
[:SOURce[n]][:CHANnel[n]]:POWer[:LEVel]:RISetime<wsp>
<value>[NS|US|MS|S]
description:
Sets the laser rise time of the chosen source.
parameters:
Any value in the specified range (see the appropriate User's Guide).
Also allowed are:
response:
none
example:
sour2:pow:ris 10ns
affects:
All Tunable Laser modules
command:
[:SOURce[n]][:CHANnel[n]]:POWer[:LEVel]:RISetime?
syntax:
[:SOURce[n]][:CHANnel[n]]:POWer[:LEVel]:RISetime?<wsp>
[MIN|DEF|MAX]
description:
Returns the laser rise time of the chosen source.
parameters:
Also allowed are:
response:
The rise time as a float value in seconds.
sour2:pow:ris? → +1.00000000E-009<END>
example:
affects:
All Tunable Laser modules
Introduction to Programming
Signal Generation – The SOURce Subsystem
MIN: minimum programmable value
MAX: maximum programmable value
DEF: This is not the preset (*RST) default value but
is half the sum of, the minimum programmable
level and the maximum programmable level
MIN: minimum programmable value
MAX: maximum programmable value
DEF: This is not the preset (*RST) default value but
is half the sum of, the minimum programmable
level and the maximum programmable level
107