HP 8163A Programming Manual page 115

command: [:SOURce[n]][:CHANnel[n]]:WAVelength:SWEep:DWELl?
syntax: [:SOURce[n]][:CHANnel[n]]:WAVelength:SWEep:DWELl?
[<wsp>MIN|MAX|DEF]
description: Returns the dwell time.
parameters: none
Also allowed are:
response: The dwell time in seconds.
example:
wav:swe:dwel?
affects: All Tunable Laser modules
command: [:SOURce[n]][:CHANnel[n]]:WAVelength:SWEep:MODE
syntax: [:SOURce[n]][:CHANnel[n]]:WAVelength:SWEep:MODE<wsp><mode>
description: Sets the sweep mode.
parameters: STEPped:
MANual:
CONTinuous:
response: none
example:
wav:swe:mode STEP
affects: All Tunable Laser modules
Introduction to Programming
Signal Generation – The SOURce Subsystem
MIN: minimum programmable value
MAX: maximum programmable value
DEF: This is not the preset (*RST) default value but
is half the sum of, the minimum programmable
value and the maximum programmable value
→
+5.00000000E-001<END>
Stepped sweep mode
Manual sweep mode
Continuous sweep mode
115