HP 8163A Programming Manual page 84

command: :SENSe[n][:CHANnel[n]]:FUNCtion:STATe?
syntax: :SENSe[n][:CHANnel[n]]:FUNCtion:STATe?
description: Returns the function mode and the status of the function.
parameters: none
response: NONE
LOGGING_STABILITY
MINMAX
PROGRESS
COMPLETE
example:
sens1:func:stat?
LOGGING_STABILITY
affects: All power meter modules
command: :SENSe[n][:CHANnel[n]]:FUNCtion:THReshold
syntax: :SENSe[n][:CHANnel[n]]:FUNCtion:THReshold<wsp><mode>,
<threshold value>[PW|NW|UW|MW|Watt|DBM]
description: Sets the start mode and the threshold value.
parameters: ABOVe:
BELow:
IMMediately:
Threshold Value:
response: none
example:
sens1:func:thr? IMM,20nw
affects: All power meter modules
Introduction to Programming
Measurement Functions – The SENSe Subsystem
→
,
COMPLETE
84
No function mode selected
Logging or stability function
MinMax function
Function is in progress
Function is complete
<END>
Function starts when power is above the
threshold value.
Function starts when power is below the
threshold value.
Function starts immediately.
A float value in Watts or dBm.
<END>