Push Handles; Tray; Overview Of Other Options - Otto Bock Skippi Instructions For Use Manual

Use
35

7.16.3 Push handles

The push handles make pushing the wheelchair easier for the attendant.
36

7.16.4 Tray

INFORMATION
► The position of the tray should have been adapted to the user by the qualified personnel.
► If necessary, the user or an attendant can readjust the position of the tray.
The tray serves as a supporting surface during meals, when working or when playing. Its transparency permits
examination of the legs and correction of the sitting posture.
The tray can be swung away for getting in and out. It is mounted using a receiver tube under the arm support.
Detailed information on safe use, adjustment, use, cleaning and maintenance can be found in the separate instruc­
tions for use included with the tray.

7.16.5 Overview of other options

INFORMATION
You can find these and other optional add-on components on the order form and in the accessories catalogue.
The power wheelchair can be equipped with additional options:
• Armrest accessories: Special adapters for the armrests in our accessories catalogue
• Mounting kit for head/neck supports: For installation on the back support tube
• Joystick top: Tetra fork, STICK S80, softball, ball top, sponge ball
• Control panel safety bar: Metal bar for impact protection
• Bumper bar
• Manual horn
• Pennant
• Puncture-proof tyres: Solid rubber tyres
42
Using the lights
Pressing the [Lights on/off] button activates or deactiv­
ates the lights (see fig. 35, item 1).
The lighting can be removed by opening the rubber
band on the underside of the lamp.
Please note: When fastening the rubber band, always
use the last hole of the rubber band (the largest diamet­
er).
As a rule, the lighting is mounted on the frame tube on
the front right side in the driving direction (see fig. 35).
The integrated battery is charged using the supplied
USB cable (see fig. 35, item 3). The USB cable is con­
nected to a PC or a battery charger with a USB con­
nection (battery charger not included in the scope of
delivery).
Adjusting the height
1) Release the clamping lever.
2) Adjust the push handle to the desired height.
INFORMATION: To reduce the transportation
size, slide the push handles all the way down
and turn them to the inside if needed.
3) Close the clamping lever tightly.
INFORMATION: Both push handles must be
adjusted to the same height during use.
Skippi