3 Safety Notes
3.1 Intended Use
The fast ALMEMO
®
measuring module for voltage and current is intended for
measuring current and voltage signals. These include voltage DC, current DC,
voltage AC, current AC, and frequency. The measuring module is qualified for
voltage measurements up to 400V (DC) and 400V
(AC) as well as for current
eff
measurements up to 20A (DC) respectively 20A
(AC).
eff
The adaptor plug allows measuring voltages and currents on electrical circuits that
are electrically directly connected to the low voltage grid (CAT II). The adaptor
plug shall only be used in combination with the measuring module. The use of
other operating modes is not approved.
- 5 –