6 How to use the adaptor plug
Please keep in mind that while installing the mains adaptor, a quick
disconnection from the power supply must be possible at all times.
Wire in a zero-potential condition (especially for measurements above
50V).
During operation never touch any exposed connections and
components to avoid electric shocks.
Use the supplied touch protected connection cables.
Be particularly careful that the current modules are always connected
in series to the load i.e. in an input lead, and that they must not be
directly connected to the voltage source. When using the adaptor
plug, make sure to connect the appropriate sockets of the adaptor
plug and the measuring module (A-A, V-V, COM-COM). In this
context, the color of the sockets must be observed.
socket V
socket COM
socket A
mains plug
jumper
- 19 –