Ahlborn ALMEMO ZAD 900-AB Series Instruction Manual page 13

4 Product
The ALMEMO Control program enables the configuration via the sensor menu
®
(starting with V. 5.14.0.330). For this purpose, you will find the "Sensor Menu"
under "Edit" in the list of the monitoring points. In this "Sensor Menu" you can
primarily program up to 4 monitoring points with the specific measuring ranges of
the D6 sensor and further settings. The measuring ranges will be displayed on the
port featuring descriptive acronyms. Other than the range, an up to 2-digit
dimension and a comment will be automatically programmed and afterwards the
channel will be locked with 5. To delete a range, you need to select "- - - -" in the
list.
- 13 –