Pre-Assembly - Horizon Fitness MILOS 3.0 Owner's Manual

TOOLS REQUIRED:
F 13/15 mm Flat Wrench
F 5 mm L-Wrench
F 6 mm L-Wrench
F Screwdriver
PARTS INCLUDED:
F 1 Console
F 2 Upper Handlebars
F 2 Upper Handlebars Covers
F 1 Console Mast
F 1 Console Mast Covers
F 1 Stabilizer Tube
F 1 Rear Stabilizer
F 1 Water Bottle Holder
F 2 Pedal Arms
F 2 Lower Handlebars
F 2 Foot Pads
F 1 Main Frame Assembly
F 1 Adapter Cable
F 1 Tablet/Reading Rack
PRE ASSEMBLY
UNPACKING
Unpack the product where you will be using it. Place the elliptical carton on a level flat
surface. It is recommended that you place a protective covering on your floor. Never
open box when it is on its side.
WARNING
• It is recommended that two people work together for ease and efficiency while
assembling an elliptical.
• During each assembly step, ensure that ALL nuts and bolts are in place and
partially threaded. It is recommended you complete the full assembly of your unit
before completely tightening any ONE bolt.
• Several parts have been pre-lubricated to aid in assembly and usage. Please do
not wipe this off. If you have difficulty, a light application of lithium bike grease is
recommended.
NEED HELP?
If you have questions or if there are any missing parts, please refer to safety sticker
on product to contact Customer Tech Support.
13