Pre-Assembly - Horizon Fitness 5.0 R Owner's Manual

MAIN PARTS INCLUDED:
Main Frame (20)
Front Stabilizer (21F)
Rear Stabilizer (21R)
Handlebar Set (30)
Mast Cover (26)
Console (32)
Console Mast (33)
Pedal Set (37&39 L&R)
Seat Set (22, 23, 30, 34, 35 & 36)
Seat Slider Cover (24)
Power Adapter
Rear Cover Bracket (27)
PARTS PACKING
INCLUDED:
1 Hardware Kit
1 Owner's Manual
HARDWARE KIT:
1 2
Bolt Spring Washer
M8x20 Ø8
Qty: 4 Qty: 24
7 8
Flat Washer Bolt
Ø10 M8x15
Qty: 2 Qty: 8
PRE ASSEMBLY
UNPACKING
Due to the weight of the Recumbent Bike, it is recommended that two people
perform the assembly. Unpack the product where you will be using it. It is
recommended that you place a protective covering on your floor. Place the carton
on a level flat surface and remove all packing materials; do not dispose of the
packing materials until assembly is completed.
NOTE: During each assembly step, ensure that ALL nuts and bolts are in place
and partially threaded in before completely tightening any ONE bolt.
NOTE: A light application of grease may aid in the installation of hardware. Any
grease, such as lithium bike grease is recommended.
NEED HELP?
3
4
Flat Washer
Bolt
Ø8
M8x45
Qty: 24
Qty: 8
9 10 11
Bolt Bolt Bolt
M8x65 M5x10 M4x15
Qty: 2 Qty: 4 Qty: 1
If you have questions or if there are any missing
parts, contact Customer Tech Support. Contact
information is located on the back panel of this
manual.
6
5
Spring Washer
Bolt
Ø10
M10x50
Qty: 2
Qty: 2
Tool Kit
5mm Wrench
6mm Wrench
13/15mm Wrench
Screwdriver
9