Pre Assembly; Tools Included; Parts Included; Unpacking - Horizon Fitness endurance 3 Owner's Manual

SPEAKERS
CONSOLE FAN
UPPER HANDLEBAR
PULSE GRIPS
WATER BOTTLE HOLDER
TOP CAP
PIVOTING FOOT PADS
GUIDE RAIL SET
REAR COVER
4
TooLS INCLUDED:
F 8 mm L-Wrench
F 5 mm L-Wrench / Screwdriver
F 13/17 mm Flat Wrench
CONSOLE CONTROL PARTS INCLUDED:
AND DISPLAY WINDOW
F 1 Stabilizer Tube
F 1 guide Rail Set
F 2 Pedal Arms
F 2 Lower Handlebars
F 2 Upper Handlebars
LOWER HANDLEBAR
F 2 Handlebar Caps
F 2 Lower Link Arms With Footpads
F 1 Top Cap (2 pieces)
CRANK
F 1 Console Mast
F 1 Console
POWER CORD SOCKET
F 1 Water Bottle Holder
F 1 Rear Cover
STABILIZER TUBE
F 1 Audio Adapter Cable
F 1 Power Cord
F 1 Hardware Kit
MAIN FRAME
PEDAL ARM
LOWER LINK ARM
PRE ASSEMBLY

UNPACKING

Unpack the product where you will be using it. Place the elliptical carton on a level
flat surface. It is recommended that you place a protective covering on your floor.
Never open box when it is on its side.
NOTE: during each assembly step, ensure that ALL nuts and bolts are in place
and partially threaded in before completely tightening any ONE bolt.
NOTE: A light application of grease may aid in the installation of hardware. Any
grease, such as lithium bike grease is recommended.
NOTE: It is recommended that two people work together for ease and efficiency
while assembling an elliptical.
NEED HELP?
If you have questions or if
there are any missing parts,
contact Customer Tech
Support. Contact information
is located on the back panel
of this manual.
5