Upc-A/Ean-13 With Extended Coupon Code - Honeywell Voyager 1202G-BF User Manual

Single-line laser bar code scanner
Hide thumbs Also See for Voyager 1202G-BF:
Table of Contents

Advertisement

UPC-A Redundancy
If you are encountering errors when reading UPC-A bar codes, you may want to adjust the redundancy count. Redundancy
adjusts the number of times a bar code is decoded before transmission, which may reduce the number of errors. Note that
the higher the redundancy count, the longer it will take to decode the bar code. To adjust the redundancy, scan the UPC-A
Redundancy bar code below, then scan a redundancy count between 0 and 10 on the
cover of this manual. Then scan the

UPC-A/EAN-13 with Extended Coupon Code

Use the following codes to enable or disable UPC-A and EAN-13 with Extended Coupon Code. When left on the default setting
(Off), the scanner treats Coupon Codes and Extended Coupon Codes as single bar codes.
If you scan the Allow Concatenation code, when the scanner sees the coupon code and the extended coupon code in a single
scan, it transmits both as one symbology. Otherwise, it transmits the first coupon code it reads.
If you scan the Require Concatenation code, the scanner must see and read the coupon code and extended coupon code in a
single read to transmit the data. No data is output unless both codes are read. Default = Off.
* Off
Require Concatenation
UPC-A Number System 4 Addenda Required
This setting programs the scanner to require a coupon code only on UPC-A bar codes that begin with a "4." The following
settings can be programmed:
Require Coupon Code: All UPC-A bar codes that begin with a "4" must have a coupon code. The UPC-A bar code with
the coupon code is then transmitted as a single, concatenated bar code. If a coupon code is not found within the
Timeout
period, the UPC-A bar code is discarded.
Don't Require Coupon Code: If you have selected Require Coupon Code, and you want to disable this feature, scan
Don't Require Coupon Code. UPC-A bar codes are transmitted, depending on the setting you are using for
13 with Extended Coupon
Default = Don't Require Coupon Code.
* Don't Require Coupon Code
8 - 28
Save
bar code. Default = 0.
UPC-A Redundancy
Code.
Programming Chart
inside the back
Allow Concatenation
UPC-A/EAN-
Addenda

Advertisement

Table of Contents
loading

This manual is also suitable for:

Voyager 1200gVoyager 1202g

Table of Contents