Output Restart Delay - Agrowtek GrowControl GCX Instruction Manual

Cultivation control systems
Hide thumbs Also See for GrowControl GCX:
Table of Contents

Advertisement

Output Restart Delay

Any device output on the GCX system can be con gured with a restart delay timer (anti short-cycle timer.)
If a time value is set for the re-start delay on an output, the output will be disabled for the delay time after
it has turned o . The delay time prevents the re-start of the output until it has elapsed in order to prevent a
short cycle of the equipment operated by the output.
• Pumps
• Compressors
• Fan motors
• Lights
To set an output re-start delay:
1. Select the device in the list.
2. Select the output channel in the drop-down to edit.
3. Enter the desired delay time.
4. Press the save button to store the delay setting in system memory.
1
When the output turns o and the restart delay timer is active, the output status will be shown in RED.
43
© Agrowtek Inc. | www.agrowtek.com | Technology to Help You Grow™
4
2
3

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the GrowControl GCX and is the answer not in the manual?

This manual is also suitable for:

Growcontrol gcx+

Table of Contents