The Boot Sequence Menu - Siemens SIMATIC PG 720 PII Manual

Programming device
Table of Contents

Advertisement

6.1.5

The Boot Sequence Menu

Summary
This menu allows you to prioritize the boot devices.
Figure 6-16 The "Boot Sequence" Submenu
This menu lists the boot devices in groups. The group with the highest
priority is at the top. The procedure for changing the sequence is as
follows:
Use the
group to its new position in the sequence.
Note
During booting the boot drive can be selected with the ESC key.
PG 720 PII Programming Device
C79000-G7076-C756-02
PhoenixBIOS Setup-Utility
Main
Advanced
Security
Power
Diskette Drive
Removable Devices
Hard Drive
ATAPI CD-ROM Drive
F1
Help
Select Item
+ / –
ESC Exit
Select Menu
Enter Select
keys to select a group and the + or – keys to move the
Configuring the PG 720
Boot Sequence
Version
Exit
Item Specific Help
Keys used to view or configure
devices:
<Enter> expands or collapses
devices with a + or –
<Ctrl+Enter> expands all
<Shift + 1> enables or disables a
device.
<+> and <–> moves the device up or
down.
<n> May move removable device
between Hard Disk or Removable
Disk <d> Remove a device that is not
installed
Change Values
Setup Defaults
F9
Sub-Menu
F10
Save and Exit
6-23

Advertisement

Table of Contents
loading

Table of Contents