Table of Contents
Advertisement
Unpacking and Setting Up the PG 720
Detaching the
In certain situations, it is helpful to remove the keyboard.
Keyboard
Figure 2-3 Detaching the Keyboard
Caution
!
Risk of tipping!
If the keyboard is detached, there is a risk of the unit tipping over.
Before removing the keyboard, make sure that you pull out the support
from the device stand (Figure 2-4) and pull out the additional hoop.
Detaching
You detach the keyboard as follows:
1. Grip the keyboard hinges in the stand behind the keyboard.
2. Pull the locks in the middle of the hinge assembly towards the
3. Pull the keyboard up and out.
4. Place the keyboard on a suitable surface, using the hinge assembly
Refitting
You attach the keyboard again as follows:
1. Place the keyboard cable in the cable conduit in the stand.
2. Snap the keyboard hinges into the receptacles in the stand.
Note
When attaching the keyboard, make sure that the cable is lying correctly
in the cable conduit and is fixed in position.
2-4
Press in the catches in the
middle of the hinges
keyboard.
as a stand.
PG 720 PII Programming Device
C79000-G7076-C756-02
Advertisement
Table of Contents
