Boot" Tab - Siemens SIMATIC IPC MD-34A Operating Instructions Manual

Firmware/BIOS description
7.2 Configure firmware
Firmware setting
TPM Availability
Clear TPM
Supervisor Pass-
word
User Password
Set Supervisor
Password
Set User Password
TLS Certificate
Manager
: Only visible with device configuration with Trusted Platform Module (TPM).
1
7.2.4

"Boot" tab

Boot behavior of the device, bootable device components (boot media) and boot order.
Calling "Boot" tab
Select: "Setup Utility (Page 71)" > "Boot".
Firmware setting
Quick Boot
Quiet Boot
Network Stack
PXE Boot capabil-
ity
76
Value
Available
1
Hidden
Installed
Not Installed
Installed
Not Installed
Value
Enabled
Disabled
Enabled
Disabled
Enabled
Disabled
Disabled
1
UEFI: IPv4
HTTP: IPv4
HTTP and PXE:
IPv4
Setting in deliv- Meaning
ery state
x The TPM (Trusted Platform Module) is
Available or Hidden in the operating
system.
Note: When it is set to Hidden mode, do
not expose TPM to 0.
Choose to remove all TPM context asso-
ciated with a specific owner.
It displays "Installed" here if Supervisor
Password is set.
x
You can set User Password after the
Supervisor Password is set. It displays
x
"Installed" here if User Password is set.
Install or change the password.
The length of the password must be
greater than 1 character.
Install or change the password.
It's available for configuration only after
Supervisor Password is configured. The
length of the Password must be greater
than 1 character.
Maintain certificate files for TLS pro-
cessing. You can choose to import or
delete Certificate.
Setting in deliv- Meaning
ery state
x Feature in BIOS that reduces computer
boot time.
x Feature in BIOS that makes computer
start up faster and without usual error
messages on BIOS display.
x Enable or disable the Network as a boot
device.
Enable Pre-Boot Execution Environment.
Operating Instructions, 08/2023, A5E52427535-AA
MD-34A