Menu Structure - Siemens SINAMICS G120P VSD Getting Started Manual

Locking and unlocking the keypad
To lock the BOP-2 keypad press
press and simultaneously for 3 seconds or more.
Screen icons
The BOP-2 displays a number of icons at the left-hand side of the display to indicate the actual state of the
Inverter. These icons are explained in the table below.
Function Status
Command source Hand
Inverter status Inverter and motor running
Jog Jog function is active
Fault/alarm Fault or alarm pending
Flashing symbol = Fault
Steady symbol = Warning

6.1.2 Menu structure

Page 17 of 50
and simultaneously for 3 seconds or more. To unlock the keypad
Icon Remarks
When the HAND mode is active the icon is
displayed. When AUTO mode is active, no icon
is displayed.
This is a static icon and does not rotate.
If a fault is detected, the Inverter will be stopped
and the user is required to take the necessary
corrective actions to clear the fault. An alarm is
a condition that will not stop the Inverter, for
example, over temperature.
Last Revised: 4/11/2011
Building Technologies