Table of Contents
Advertisement
Screen Display
With the standard setting of your programming device, the display
Following
shown below appears following power-on:
Power On
Phoenix NoteBIOS 6.0 A5E000xxxxx-01
Copyright 1985-98 Phoenix Technologies Ltd., All Rights
Reserved.
SIEMENS PG 720PII
CPU = Pentium II
640K System RAM Passed
63MB Extended RAM Passed
0512K Cache SRAM passed
System BIOS shadowed
Video BIOS shadowed
UMB upper limit segment address: xxxx
Mouse initialized
Fixed Disk 0: IBM DADA 26480
ATAPI CD–ROM: T...
Press <F2> to enter SETUP
If you press the F2 key while the above display is shown, you select
the ROM-based BIOS setup program. In this program, you can set a
number of system functions and hardware configurations of your
programming device.
The standard settings are effective on delivery. You can change these
settings using the BIOS setup. The modified settings become effective
when you have saved them and terminated the BIOS setup.
PG 720 PII Programming Device
C79000-G7076-C756-02
Configuring the PG 720
266MHz
6-3
Advertisement
Table of Contents
