Table of Contents
Advertisement
Configuring the PG 720
"Multi-Sector Trans-
The entry in the Multi-Sector Transfer field defines the number of
fer" Field
sectors transferred per interrupt. The value depends on the drive and
should be set only by setting the Type field to Auto .
Disabled
2,4,8,16
"LBA Mode Control"
If the LBA Mode Control field (enabled,disabled) is set to 'Enabled', the
field
system supports hard disks with capacities greater than 528 Mbytes.
The value depends on the drive and should be set only by setting the
Type field to Auto .
"32 Bit I/O" Field
The setting in the 32 Bit I/O field defines the mode of access for the
drive
Disabled
Enabled
"Transfer Mode" and
The settings in these fields define the interface's data-transfer rate. The
"Ultra DMA Mode"
value depends on the drive and should be set only by setting the Type
Fields
field to Auto .
Hit ESC to exit the submenu.
6-8
sectors
16-bit access
32-bit access
(default)
PG 720 PII Programming Device
C79000-G7076-C756-02
Advertisement
Table of Contents
