Table of Contents
Advertisement
Connecting a PS/2
To connect the keyboard, proceed as follows:
Keyboard
1. Switch off your device.
2. Unplug the keyboard connector from the base of the unit.
3. Plug in the PS/2-type keyboard connector.
Note
It is advisable to use a keyboard cable with an angled connector, so
that the connector does not extend beyond the back panel.
The keyboard cable must be inserted in the cable conduit on the back
panel of the unit, otherwise the connector can work loose when the
device is tilted.
You can connect peripheral devices with USB interfaces to the USB
Connecting USB
Periphery
port.
1. Open the port cover on the left-hand side panel.
2. Plug the USB cable into the port, for example under Windows 98.
The device connected in this way is available as soon as it has been
registered by the Plug and Play operating system.
Figure 4-7 USB Port
PG 720 PII Programming Device
C79000-G7076-C756-02
Installing and Operating the PG 720
USB port
4-11
Advertisement
Table of Contents
