Table of Contents
Advertisement
Product Overview
Advantages of the
Compared with a PC with standard hardware and software, the
PG 720
PG 720 programming device of the SIMATIC family has numerous
advantages:
1-2
You can develop, debug, and document user programs for
SIMATIC S5 and SIMATIC S7 programmable logic controllers with
the PG 720 without the need for additional hardware or software.
The rugged design and practical functions of the PG 720 make it
particularly suitable for use on-site under tough industrial conditions.
It is extremely light and easy to transport. The PG 720 meets the
specific requirements of industrial environments such as noise
immunity, compliance with the relevant standards, ruggedness,
simple transportation, and commissioning.
The PG 720 is equipped with a battery allowing it to be operated
without a mains connection.
The PG 720 can be set up and operated in a large number of
different ways and positions, and can therefore be used practically
anywhere it is needed.
The PG 720 has all the integral ports necessary for connecting it to
SIMATIC automation devices:
– Programming interface for SIMATIC S5 memory submodules.
– Programming interface for SIMATIC S5 and SIMATIC S7
memory cards in credit card format.
– Communication interfaces for connection to S5 and S7
programmable logic controllers.
The PG 720 is supplied with all the necessary system and
automation software already installed on the hard disk.
Since Windows 98 is also already installed, you can, of course, also
use the PG 720 as a stand-alone workstation, and run all the
standard software available on the market that requires MS-DOS or
Windows.
In terms of performance and expansion capability, your
programming device meets all the normal requirements of a PC.
This means that the PG 720 can also be used as a fully-fledged
personal computer.
PG 720 PII Programming Device
C79000-G7076-C756-02
Advertisement
Table of Contents
