Table of Contents
Advertisement
Getting to Know the PG 720
Right-Hand Side
You access the slots for programming S5 submodules, S5/S7 memory
Panel (Processing
cards, the PCMCIA port, and the disk drive from the right-hand side of
Side)
the PG 720 (processing side).
Figure 3-3 Right-Hand Side Panel (with Port Covers Removed)
The following table contains an overview of the ports and connectors
on the right-hand side panel:
Table 3-4
PC card type II port ; slot 2
PC card type III port; slot 1
S5 submodule port
Memory card port
Disk drive
Note
PC cards is a generic term for Cardbus cards and PCMCIA cards: see
Section 4.6.
3-6
Ejector for PC
cards
PC cards types I/II; slot 2
PC cards types I/II/III; slot 1
Ejector for PCMCIA
cards
Orientation point
Memory card port
S5 submodule port
Connectors on the Right-Hand Side Panel of the Unit
Interface Port
Ejector for diskettes
3.5 in. disk drive
Access LED
CD-ROM drive
Function
Connection for PC card types I/II
Connection for PC card types I/II/III
Programming SIMATIC S5 submo-
dules
Programming SIMATIC memory
cards
Working with 3.5" disks
PG 720 PII Programming Device
C79000-G7076-C756-02
Advertisement
Table of Contents
