Siemens SIMATIC PG 720 PII Manual page 31

Programming device
Table of Contents

Advertisement

Hard Disk Drive
You can use a number of different hard disk drives in your PG 720. The
memory capacity of the particular type of hard disk can be found in the
Product Information Bulletin and SETUP program.
When the hard disk is accessed, this status is indicated by the access LED
for external storage media on the front of the device.
Caution
!
Risk of data loss and damage to drive!
Drives are sensitive to vibrations and shock. Any vibrations occurring
during operation can lead to the loss of data or damage to the drive.
After switching off, wait a moment until the drive has stopped spinning
(approximately 10 sec.) before you move the programming device.
PG 720 PII Programming Device
C79000-G7076-C756-02
Getting to Know the PG 720
3-17

Advertisement

Table of Contents
loading

Table of Contents