Quantum CHECK POINT MAESTRO ORCHESTRATOR 1U Getting Started Manual page 54
Hide thumbs
Also See for CHECK POINT MAESTRO ORCHESTRATOR 1U:
- Install manual (1 page) ,
- Installation manual (12 pages) ,
- Quick start manual (36 pages)
Table of Contents
Advertisement
Connecting cables between Downlink ports on each Quantum Maestro Orchestrator and 2 out of 4
ports on the Quad Port Card on each Security Appliance
Illustration
Legend
Item
Description
A
First Orchestrator.
B
Second Orchestrator.
C
Security Appliances in Security Groups.
A DAC cable connected to the dedicated Synchronization ports on the Orchestrators.
Cables that connect odd ports on the Quad Port Card to the first Orchestrator.
Cables that connect even ports on the Quad Port Card to the second Orchestrator.
Instructions
Important - In R80.20SP, this
connection method is supported
only with the
Hotfix Accumulator
above) installed on Orchestrators
and Security Groups.
On each Security Appliance (C) in the
Security Group:
1. Connect a cable from
Quad Port Card to a Downlink port on
the first Orchestrator (A).
2. Connect a cable from
Quad Port Card to a Downlink port on
the first Orchestrator (A).
3. Connect a cable from
Quad Port Card to a Downlink port on
the second Orchestrator (B).
4. Connect a cable from
Quad Port Card to a Downlink port on
the second Orchestrator (B).
Quantum Maestro Getting Started Guide | 54
Single Site
R80.20SP Jumbo
(Take 105 and
Port 1
on the
Port 3
on the
Port 2
on the
Port 4
on the
Advertisement
Table of Contents
Need help?
Do you have a question about the CHECK POINT MAESTRO ORCHESTRATOR 1U and is the answer not in the manual?