Single Site
This section describes how to connect cables to Quantum Maestro Orchestrators on the same site.
Connecting Two Quantum Maestro Orchestrators for
Redundancy
In This Section:
This section describes the connection of two Quantum Maestro Orchestrators for Redundancy on the same
site.
Best Practice - For redundancy, install and connect two Quantum Maestro
Orchestrators on the same site.
Diagram
Important - It is possible to connect only two Quantum Maestro Orchestrators of the
same model (see MBS-5038).
Best Practice - Connect cables to the same Uplink and Downlink ports on the two
Quantum Maestro Orchestrators (for example, if you connected to an Uplink port 4 on
one Quantum Maestro Orchestrator, then you must connect to an Uplink port 4 on the
other Quantum Maestro Orchestrator).
Notes:
This logical diagram is based on MHO-170, but applies equally to all Quantum Maestro Orchestrator
n
models.
This logical diagram shows two example Security Groups that contain two Security Appliances and
n
two Uplink ports each.
Quantum Maestro Getting Started Guide | 48
Single Site