Mounting The Quantum Maestro Orchestrator Mho-140 And Mho-170 In A Rack - Quantum CHECK POINT MAESTRO ORCHESTRATOR 1U Getting Started Manual

Mounting the Quantum Maestro
Orchestrator MHO-140 and MHO-
170 in a Rack
This section provides the information necessary to mount the Quantum Maestro Orchestrator MHO-140 or
MHO-170 in a rack.
Installation and Initialization
Installation and initialization of the Quantum Maestro Orchestrator requires attention to the normal
mechanical, power, and thermal precautions for rack-mounted equipment.
Important:
The rack mounting holes conform to the EIA-310 standard for racks with
n
length 50-60 cm (19.7-23.6 inches).
Take precautions to guarantee proper ventilation to maintain good airflow at
ambient temperature.
Unless otherwise specified, Check Point products are designed to work in an
n
environmentally controlled data center with low levels of gaseous and dust
(particulate) contamination.
The installation procedure for the Quantum Maestro Orchestrator involves these phases:
Phase Instructions
1 Make sure that none of the shipping carton contents is missing or damaged.
See "Shipping Carton Contents" on page 5
2 Follow the
3 Pay attention to the airflow consideration within the Quantum Maestro Orchestrator and
rack.
See "Airflow in MHO-170 and MHO-140" on the next page
4 Mount the Quantum Maestro Orchestrator into a rack enclosure.
See "Static Rail Kit for MHO-170 and MHO-140" on the next page
5 Power on the Quantum Maestro Orchestrator.
"Step 7: Initial Power On" on page 40
See

Mounting the Quantum Maestro Orchestrator MHO-140 and MHO-170 in a Rack

Safety Warnings .
.
.
.
Quantum Maestro Getting Started Guide | 29
.