Quantum CHECK POINT MAESTRO ORCHESTRATOR 1U Getting Started Manual page 11

Connecting cables between Downlink ports on each Orchestrator and 2 out of 4 ports on
the Quad Port Card on each Security Appliance
Illustration
Legend
Item Description
A First Orchestrator.
B Second Orchestrator.
C Security Appliances in Security Groups.
A DAC cable connected to the dedicated Synchronization ports on the
Orchestrators.
Cables that connect odd ports on the Quad Port Card to the first Orchestrator.
Cables that connect even ports on the Quad Port Card to the second
Orchestrator.
Getting Started with MHO-140 - Single Site with Two Orchestrators
Quantum Maestro Getting Started Guide | 11
Instructions
Important - In
R80.20SP, this
connection method is
supported only with the
R80.20SP Jumbo Hotfix
Accumulator
and above) installed on
Orchestrators and
Security Groups.
On each Security Appliance (C) in
the Security Group:
a. Connect a cable from
on the Quad Port Card to a
Downlink port on the first
Orchestrator (A).
b. Connect a cable from
on the Quad Port Card to a
Downlink port on the first
Orchestrator (A).
c. Connect a cable from
on the Quad Port Card to a
Downlink port on the second
Orchestrator (B).
d. Connect a cable from
on the Quad Port Card to a
Downlink port on the second
Orchestrator (B).
(Take 105
Port 1
Port 3
Port 2
Port 4