Table of Contents
Advertisement
Mounting the TC2201E in a Rack
2
Required Tools
Installing the
TC2201E With Ear
2
Brackets
Before beginning installation, review the following installation
procedure. When familiar with the installation procedure, follow the
steps indicated to mount the TC2201E into a standard 19" rack using the
provided mounting materials, which include:
•
One TC2201E
•
Two ear brackets
•
A bag of mounting screws (8 #M6x12 Phillips screws and 4 #6-
32x.312 Phillips screws)
The following tool is required for installation:
•
#2 PHILLIPS screwdriver
To install the TC2201E with ear brackets:
1 Remove the TC2201E from the protective bag.
2 Determine where the TC2201E will be mounted.
Place the TC2201E so the intake/exhaust vents remain
Note:
clear of obstructions to ensure proper airflow.
3 Remove any blanking panels and other equipment from the chosen
rack location.
4 Install the cage nuts on the vertical mounting rails of the rack cabinet,
as shown in
figure 8
Quantum TC2201E User's Guide
Mounting the TC2201E in a Rack
below.
Chapter 2 Getting Started
2
13
Advertisement
Table of Contents
