Required Tools; Tc2201 Upgrade Procedure; Preparing The Quantum Scalar 50 Library - Quantum Scalar 50 Upgrade Instructions

Quantum Scalar 50 TC2201 iSCSI Bridge Upgrade Instructions
81-81792-01 A01
July 2007
0

Required Tools

TC2201 Upgrade Procedure

Preparing the
Quantum Scalar 50
0
Library
Figure 1 Operations
Screen
4
The following tools are required to install the TC2201 bridge upgrade:
• #2 PHILLIPS® screwdriver
The upgrade procedure is identical regardless of the number of TC2201s
installed except where noted. The upgrade procedure consists of the
following major steps:
•

Preparing the Quantum Scalar 50 Library

• Removing Tape Drive SCSI Cables
• Installing the TC2201 Bridge
• Installing the Ethernet Cables
• Installing SCSI Cables
• Configuring the TC2201 Bridge Software
To prepare the Scalar 50 library:
Use appropriate ESD procedures when assembling and
Caution:
installing the TC2201 option.
1 With the library turned on, press the
screen (see
Operations
2 Select
Library operations
3 From the library operations menu, select
to turn the library offline.
4 Verify that the OCP display indicates "Offline" from the
TC2201 Upgrade Procedure
button on the OCP to access the
Ops
figure 1).
Enter
and press .
Enter
Library on/offline
0
and press
Enter
screen.
OCP