Table of Contents
Advertisement
# nvme list
A list of the NVMe drive's namespaces is displayed.
NOTE: If the drive has not been mapped to at least one host in the WebUI HOSTS tab, this command will fail.
3. To ensure high availability, verify that the drive has the correct number of host paths connected.
# nvme list-subsys
In this example, the drive is connected to two hosts:
nvme-subsys0 - NQN=nqn.2015-09.com.hpe:nvm.1
\
+- nvme1 rdma traddr=10.10.10.101 trsvcid=4420 live
+- nvme2 rdma traddr=10.10.10.102 trsvcid=4420 live
Administrator tasks
Access the Administrator tasks by clicking Admin then clicking Admin dashboard in the upper-right area of the WebUI.
Access to functionality is based on your user privilege level.
•
Adding users
Setting the system time
•
Updating firmware
•
•
Viewing logs
•
Setting up system alerts
Adding users
Each user is assigned a role within the organization. The available predefined roles follow:
•
Administrator - Can perform all operations, including creating and editing users. Users in this role can also edit
Manager settings or IOM parameters such as mgmt IP, FQDN, and Time/Date
•
Operator - Can edit JBOF parameters such as Drives, Hosts, and Bridges settings.
•
ReadOnly - Can view status, but cannot modify any configuration settings except their own user password.
If the LDAP directory service is used for authentication, LDAP users will be mapped to a user role based upon their group
membership. Both local and LDAP users can be configured.
Prerequisites
Requires Administrator privileges
Procedure
1. Select the USERS tab in the Admin Dashboard.
2. To add a local user:
a. Click Add user.
22
Configuration
Advertisement
Table of Contents
