Important Product Information; Proper Intended Use - Siemens SIMOTICS S-1FG1 Operating Instructions Manual

1.5

Important product information

Definition of terms
Terms
Servo geared motor, geared motor, motor-gearbox
unit, 1FG1, SIMOTICS‑1FG1
Motor, servomotor
Gearbox
Input speed, input torque
Output speed, output torque
1.5.1

Proper intended use

Unintended use of the servo geared motors
If you do not use the servo geared motors for their proper intended use, then there is a risk of
death, severe injury and/or material damage.
• Only use the servo geared motors for their proper intended purpose.
• Ensure that the conditions at the installation site comply with all the rating plate data.
• Ensure the conditions at the installation site comply with the conditions specified in this
Malfunction of active implants due to magnetic and electrical fields.
Electric motors represent a danger to people with active medical implants, e.g. heart
pacemakers, who come close to these motors.
• If you are affected, stay a minimum distance of 300 mm from the servo geared motors
If you wish to use special versions and design variants whose specifications vary from the
servo geared motors described in this document, then contact your local Siemens office.
If you have any questions regarding the intended usage, please contact your local Siemens
office.
The 1FG1 is designed for use in industrial and commercial facilities.
SIMOTICS S-1FG1 servo geared motor
Operating Instructions, 12/2022, A5E47360747B/RS-AC
WARNING
documentation. When necessary, take into account deviations regarding approvals or
country-specific regulations.
WARNING
(tripping threshold for static magnetic fields of 0.5 mT according to Directive 2013/35/EU).
1.5 Important product information
Definition
Product (unit) comprising motor and gearbox com‐
ponents
Synchronous motor to drive the gearbox
Helical gearbox, parallel shaft gearbox, bevel gear‐
box or helical worm gearbox to transmit the motor
speed and the motor torque
Values on the motor side of the gearbox
Values on the customer side of the gearbox
Introduction
17