Table of Contents
Advertisement
Introduction
1.5 Important product information
1.4.6
Training
Description
SITRAIN – Digital Industry Academy offers a comprehensive range of training courses on
Siemens industrial products – directly from the manufacturer, for all industries and use cases,
for all knowledge levels from beginner to expert.
More information can be found on the Internet via the following address
(https://www.siemens.com/sitrain).
1.4.7
Spare parts services
Description
By using the online spare parts service "Spares on Web", you ensure the smooth operation of
your product. The spare parts service is aimed at the following:
• Improved spare parts inventories by balancing stock and spare parts on call
• Minimized downtimes during a plant standstill
• Reduced costs
More information can be found on the Internet via the following address
(https://www.sow.siemens.com).
1.5
Important product information
Intended use of the machines
These machines are intended for industrial installations. They comply with the harmonized
standards of the series EN / IEC 60034 (VDE 0530). It is prohibited to use these motors in
hazardous zones if the marking on the motor rating plate does not explicitly permit line or
converter operation. If other/more wide-ranging demands (e.g. protection so that they
cannot be touched by children) are made in special cases – i.e. use in non-industrial
installations – these conditions must be ensured by the customer.
Note
EU Machinery Directive
Low-voltage motors are components designed for installation in machines in accordance with
the EU Machinery Directive. Commissioning is prohibited until it has been absolutely
identified that the end product is in conformance with this Directive. Comply with standard
EN / IEC 60204-1.
16
1MB1.33 Eagle Line shaft heights 71 ... 315
Operating Instructions, 08/2023, A5E52990459A
Advertisement
Table of Contents
